706.DOC
                  The Complete TurboModem Plus
                  Using Carbon Copy for Windows
                                
                                
This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

This document discusses the operation of Carbon Copy for Windows
with the Complete Turbo Modem Plus.  The following information
will describe the changes necessary to Carbon Copy for Windows's
configuration parameters to have it function with the Complete
Turbo Modem Plus.

Note that the following information is presented with the
assumption that you are using a mouse.  If you are not using a
mouse, please refer to the Carbon Copy for Windows manual for
keyboard equivalents.

Setting up Carbon Copy for Windows
To configure Carbon Copy for Windows for use with the Complete
Turbo Modem Plus the modem initialization string must be set to
the following.  Run either the Guest or Host applications.
Choose Options from the menu.  Then select Port Settings.  Choose
the Com port the TurboModem Plus is configured for and choose
57600 for the port speed.  The Complete TurboModem Plus is not on
the modem selection menu so you will choose Hayes Ultra 14400 and
then click OK.

Other Considerations
If problems develop please check the following for possible
problems.  Make sure the Com port setting in Carbon Copy for
Windows matches the setting on the Complete Turbo Modem Plus.  If
you receive a failure in connecting be sure to check the modem
with a communications package to ensure the modem functions
properly.  Be sure to check to see if the modem initialization
string matches the above configuration.  If problems still occur
contact Microcom to ensure your Carbon Copy for Windows settings
are correct.