CPC121592 314.DOC Complete FAX/Portable Plus Recommended Initialization String This document is provided as "For your information" and as is. Neither The Complete PC nor any of it's employees assume any responsibility for consequences resulting from the use of the following information nor can the Complete PC technical support provide help with this document. The user of said information does so at his or her own risk. The following initialization string is provided for use with communications software that permit a modem initialization or originate string. It is by no means the only string that can be used, just the most effective. The following string includes full error correction as well as full data compression for maximum output. Please use this string if the software you are using requests one or if you do not have a Hayes 2400 modem choice: ATE1V1&F&C1&D2\A3\N3\Q3\V1%C1\J0 The following is a break down of the initialization string to show what commands are performed: AT Attention Characters E1 Turns "Echo Commands" to on V1 Turns "Word Responses" to on &F Recalls Hayes factory default configuration &C1 Turn on Carrier Detect signal when remote carrier &D2 signal is present Modem hangs up, returns to the Command Mode, and prepares for asynchronous operation following an ON to \A3 OFF Data Terminal Ready transition \N3 Selects a 256 character maximum MNP block size \Q3 Enables Auto-Reliable link operation \V1 Selects RTS/CTS signal bidirectional hardware flow %C1 control \J0 Turns "Send extended responses" to on Enable MNP Class 5 data compression Disable RS-232-C baud rate adjustment Please refer to your Complete FAX/Portable Plus Modem Guide for more information on these commands as well as other commands available.