409.DOC
                The Complete Modem and Modem Plus
                     Using Lap Link Pro 4.0
                                
                                
This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

This document discusses the use of Lap Link Pro 4.0 on the
Complete Modem or Complete Modem Plus.  The following information
describes configuration in Lap Link Pro necessary for the
software to function with the Complete Modem or Complete Modem
Plus modem.  Please note the following information is presented
with the assumption that you are using a mouse.  If you are not
using a mouse, please refer to the Lap Link Pro manual concerning
equivalent keyboard commands.

Setting up Lap Link Pro
To configure Lap Link Pro for use with the Complete Modem or
Complete Modem Plus.  First you must execute the Lap Link
program.  Then choose Options and select Port/Modem Setup.
Choose the modem serial port used by the Complete Modem or
Complete Modem Plus modem.  You will be presented with a modem
list.  The Complete Modem or Complete Modem Plus will not be
listed in the selection menu so you must choose Hayes Compatable.

The settings Tone Dial and Auto Answer will have to be checked if
they aren't already.  Then goto Setup Port... and make sure
Enable Port, Use Modem, and Forced Standard (3-Wire) Mode are all
checked.  Set the Baud Rate setting to the modem's maximum speed
of 2,400

Click OK and then Done to save the changes .  The Modem or Modem
Plus is now configured for Lap Link Pro.

Using Lap Link Pro
To use Lap Link Pro you must remove the fax background before
loading Lap Link Pro.  The modem will not function properly with
PFAXBACK loaded.

Once the initialization string is modified, please consult your
Lap Link manual on calling and logging onto another Lap Link
machine.  Since Lap Link Pro does not operate in resident memory,
it must be on screen at all times for it to function.  If Lap
Link Pro is not operating in the foreground the software will not
work.  If you have questions concerning the use of Lap Link Pro
please contact Traveling Software.

Other Considerations
If problems develop please check the following for possible
problems.  Make sure the Com port setting in Lap Link Pro matches
the setting on the Complete Modem or Modem Plus.  If you receive
a failure in connecting be sure to check the modem with a
communications package to ensure the modem functions properly.
Be sure to check to see if the modem initialization string
matches the above configuration.