CPC121592
                                                          283.DOC
                   Complete Communicator Gold
                Recommended Initialization String
                                
                                
                                
This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

The following initialization string is provided for use with
communications software that permit a modem initialization or
originate string.  It is by no means the only string that can be
used, just the most effective.  The following string includes
full error correction as well as full data compression for
maximum output.  Please use this string if the software you are
using requests one or if you do not have a Hayes Ultra 9600 modem
choice:

ATB0E1V1&F&C1&D2\A3\N6%C1S95=44

The following is a break down of the initialization string to
show what commands are performed:

AT       Attention Characters
B0       Places the modem into a CCITT mode
E1       Turns "Echo Commands" to on
V1       Turns "Word Responses" to on
&F       Recalls Hayes factory default configuration
&C1      Turn on Carrier Detect signal when remote carrier
&D2      signal is present
         Modem hangs up, returns to the Command Mode, and
         prepares for asynchronous operation following an ON to
\A3      OFF Data Terminal Ready transition
\N6      Selects a 256 character maximum MNP block size
%C1      Enables V.42/MNP/Normal data link operation
S95=44   Enable MNP Class 5 data compression
         Enable extendend modem responses

Please refer to your Complete Communicator Gold Modem Guide for
more information on these commands as well as other commands
available.