CPC091792
Document2
                    The Complete Communicator
                      Using Canon Scanners



This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

The following file is necessary to use the Canon scanner.

                           IXHND2.COM

To install the driver, use the DOS COPY command to copy the file
IXHND2.COM into your or CCOM subdirectory.

The Command IXHND2 must be run before using your Canon Scanner
with the CFAX software.  You may want to add this command to your
AUTOEXEC.BAT file so that it is loaded automatically.  Enter the
command as follows:

                          IXHND2 /xy zz

Where x is the I/O address for your Canon Scanner board

x  =  I/O address
0  = 308-30FH (Default Value)*  If the scanned image has vertical
lines in the image  select another I/O address.
1  = 318-31FH
2  = 1A8-1AFH

Where y is the buffer address for your Canon Scanner board

y = Buffer address
0 = C0000 - C0FFFH (Default Value)
1 = C4000 - C4FFFH
2 = D0000 - D0FFFH
3 = D4000 - D4FFFH

zz specifies the interrupt vector number (Default Value is 7F) this
must be the same as entered on the CCOM Hardware Configuration
screen under the INSTALLC program.

Please contact Canon if you have any problems installing or
operating your scanner.