CPC091592
210.DOC
                  The Complete Communicator
              Installation Help for TANDY Users



This document is provided as "For your information" and as
is.  Neither The Complete PC nor any of it's employees
assume any responsibility for consequences resulting from
the use of the following information nor can the Complete PC
technical support provide help with this document.  The user
of said information does so at his or her own risk.

If you are installing a Complete Communicator and you get
the error message "error "writing" or "reading" drive D" you
must change your primary boot device on your TANDY computer
from ROM to DISK.

All Tandy TL and SL Computers come with a program called
SETUP that in used to alter the setup of the computer.  It
is included with the other DOS programs supplied with the
computer.  You run it typing:

                           SETUPTL
                             or
                           SETUPSL

The second panel you come to is titled System Startup and
has as one of it's modification areas Primary Startup
Device.  This field can have as one of its values ROM or
DISK.  If it is ROM change it to Disk.

Another modification area is titled "Check for CONFIG.SYS on
Drives", and has as possible values A, C. or NO.  You should
normally select C.  Do not select No. or our install program
will not be able to make the necessary modifications.

Another modification area is titled "Check for AUTOEXEC.BAT
on Drive.-", and has as possible values the same as above.
The same rules apply here; you will need to select C.