CPC091592
203.DOC
                    The Complete Communicator
                     Using Procomm Plus v2.0



This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

Execute Procomm Plus.  When the screen clears the trademark
screen, you will be in terminal mode.  Press Alt-S to invoke the
configuration menu.

The first item on the menu will be MODEM OPTIONS.  Press the
ENTER key to select it.

The first item under MODEM OPTIONS will be GENERAL OPTIONS.
Press the ENTER key to select it.  Option F will be Send Init if
CD High.  The default value is NO.  Press the F key to enable
edit of this option.  Change it to YES.

Press the ESC key to return to the previous menu.

Then move the highlight bar to the second option, MODEM COMMANDS.
Press the letter A to enable edit of the Initialization string.
Replace the existing string with the one below that matches your
modem.

Non MNP
Initialization string:   AT&F&C1&D1^M
Alternate:          ATE1V1Q0X4&C1&D1^M

MNP
Initialization string:   AT&F&C1&D1^M
Alternate:          AT&C1&D1E1V1Q0X4\A3\N3\Q3\V1%C1\J0^M

The alternate string should be used if you find that the
initialization string does not produce the desired result.

The remaining strings may be left at the default.

Press the ESC key twice to return to the Procomm Setup Utility
Main Menu.

Next, move the highlight bar down to the second option, TERMINAL
OPTIONS.  Press the Enter key to select it.  You'll notice that
options C and D deal with flow control.  We want the soft flow
control (XON/XOFF) to be OFF and the hard flow control (RTS/CTS)
to be ON.  After making any appropriate changes press the ESC key
to return to the Main Menu.

This concludes the settings needed by the Complete Communicator
Modem.  Set the other options and configurations at your
discretion.

Be sure to SAVE SETUP OPTIONS once you have completed all
changes.

Then press the ESC key to return to terminal mode.